SCALEXTRIC Digital C8515 2x EasyFit Plug Conversion New Type Reviews

C8515 2x EASYFIT DIGITAL PLUG SCALEXTRIC DIGITAL A ground breaking step forward in the way SCALEXTRIC is played. Now, with the DIGITAL system, up to six cars can race on one lane. At the press of a button, drivers can switch lanes for overtaking and blocking! EASYFIT DIGITAL PLUG Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EASYFIT DIGITAL PLUG is connected to convert the standard car in to a car suitable for use on a SCALEXTRIC DIGITAL layout. The conversion only requires a small screw-driver and takes less than sixty seconds to perform. The conversion process is simple..... 1/ Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2/ Connect the EASYFIT DIGITAL PLUG to the braid-to-motor wiring plug. 3/ Replace the retaining screw to secure the EASYFIT DIGITAL PLUG to the chassis. The blanking plate should be kept in a safe place as the EASYFIT DIGITAL PLUG can be transferred to another car. FEATURES: Digital Plug Ready underpan (DPR) allows quick-change of the digital chip in less than 60 seconds. Easy access. Plug an Go solution. One C8515 EASYFIT DIGITAL PLUG can be transferred and used on as many cars as necessary. No need for a soldering iron or modeling expertise. Note: C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug.Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006.