Buy a Di-LOG ALVA Multifunction Installation Tester and get a FREE CombiVolt 1 Voltage Indicator (worth £48.00)Limited time only | T&C's apply | Offer ends 30th April 2026— LEARN MORE —DiLOG ALVA Multifunction Installation Tester The DiLOG ALVA Multifunction Installation Tester is a high-performance multifunction tester that has been expertly designed to meet the demands of electricians who are conducting installation testing, in accordance with the IET Wiring Regulations and BS EN 61557. It is ideal for use in a range of setting environments, such as domestic, commercial, and industrial sites, with the tester also able to support full 18th edition electrical verification, right from the initial installation checks to fault diagnosis and periodic inspection. The DiLOG ALVA Multifunction Installation Tester has been designed to streamline workflows, and ensures that testing safety compliance and test traceability are front and centre. The instrument is designed for electricians who require accurate Earth Loop Impedance testing, RCD verification, continuity testing, and EVSE charger diagnostics. The ALVA MFT gives the user the confidence and clarity they need when on the job site. A full-colour TFT display and a high-resolution screen allows for the clearer interpretation of results in a range of environments. The ALVA MFT can also conduct comprehensive RCD testing, and is compatible with AC, A, B, B+, EV and F types, which ensures it can support all relevant installation scenarios including domestic circuits and EV charge points. Continuity and Earth Loop Auto Start is able to speed up routine test procedures, and can display results onto a second screen, allowing them to be verified immediately. Intelligent loop detection can automatically recognises 2- or 3-wire Loop/PSCC tests, which removes the need for manual configuration and speeds up to the testing process. The DiLOG ALVA MFT offers advanced RCD diagnostics with customisable mA settings, EV charger testing including 6mA RDC-PD/MD verification, and RCD-LOC+ loop impedance technology for accurate, non-trip testing. The ALVA Multifunction Installation Tester includes everything needed for immediate and accurate use: the tester itself, a hard shell carry case, silicone 3-wire lead set, ultra-slim GS38 shrouded test probes, and MFT mains lead, a shoulder harness, and a download lead. It also comes complete with 6 AA batteries, a calibration certificate, and a quick start guide. DiLOG RCD-LOC+ Xpert Loop Technology DiLOG’s RCD-LOC+ Xpert Loop Technology introduces a new, more dynamic way of Non-Trip Loop Testing, by delivering high-accuracy, low-current Earth Loop measurements with an adjustable test current feature, optimising test precision based on your RCD current. This ensures reliable loop impedance testing while maintaining safety and accuracy in all environments. DiLOG part number: ALVAMFTThe ALVA vs ALVA Pro The DiLOG ALVA Multifunction Installation Tester is available as a standalone tester with standard accessories, or as part of the DiLOG ALVA Multifunction Tester & EVSE Adaptor Kit, which is available by clicking here. Features ALVA MFT ALVA MFT Pro New RCD-LOC+ ✔ ✔ Auto Start Loop & Continuity ✔ ✔ 4mA/200mA Selectable Current 200mA ✔ R Max (Max R1+R2/R2 recording) - ✔ *Earth Resistance Re/Ro 3/4-wire - ✔ Continuity Range 0.01 - 2000Ω 0.01 - 2000Ω Insulation Test 50/100/250V/500V/1000V 50/100/250V/500V/1000V Auto Start PFC/PSC (L-PE/L-N) ✔ ✔ Loop/Iᴾᶠᶜ Test (Non-Trip) ✔ ✔ Loop/Iᴾᶠᶜ 2 & 3 Wire Intelligent Auto Sense (High-current) ✔ ✔ Phase - Phase Line Test (L-L) ✔ ✔ Z Max (Max Z Loop Recording) - ✔ I Max (Max PSC Recording) - ✔ RCD Test - Type AC, A, B, B+ & F (General & Selective) ✔ ✔ 6mA RDC-PD/MD (10s Test) ✔ ✔ Auto RCD Test ✔ ✔ Auto EV Loop, RCD-PD/MD Trip Time/Trip Current Test Sequence - ✔ Variable RCD Test ✔ ✔ RCD Ramp Test ✔ ✔ Phase Rotation & Phase Voltage ✔ ✔ Voltage 550V (L-N/L-PE) ✔ ✔ Intuitive ALVA UI (User Interface) ✔ ✔ Memory Download (1000 tests) - ✔ Remote Probe Optional ✔ Intelligent Full Range Protection ✔ ✔ NiMh Batteries and Charger Optional ✔ EVA Hard Shell Carry Case ✔ ✔ Full UKAS Calibration Certificate ✔ ✔ **Warranty Extendable to 5 Years ✔ ✔ *Requires optional ERT accessory. **Requires ALVA support package.Key Features Full-Colour TFT display with a high-contrast screen with interactive pass/fail settings for intuitive operation Fully automated continuity and earth loop auto start with a secondary display for results Has intelligent 2/3 wire high-current loop detection which automatically identifies 2-wire or 3-wire Loop/PSCC measurement, eliminating errors originating from manual selection RCD-LOC+ delivers high-accuracy, low-current Earth Loop with an adjustable test current feature to optimise the test accuracy based on your RCD current Supports a full range of RCD types including AC, A, B, B+, 6mA EV, and F for comprehensive fault finding Variable RCD test lets the user set custom mA values when needed Insulation testing with bargraph and selectable voltages from 50V to 1000V, plus adjustable pass/fail limits 3-phase testing with line-to-line impedance and dynamic phase rotation indication On-screen help provides visual guidance for test lead setup and operation
