DiLOG ALVA Pro Multifunction Tester & EVSE Adaptor Kit Reviews

Buy a DiLOG ALVA Pro & EVSE Adaptor Kit and get a FREE CombiVolt 2 Voltage Indicator & Proving Unit Kit (worth £150)Limited time only | T&C's apply | Offer ends 30th April 2026— LEARN MORE —DiLOG ALVA Pro Multifunction Tester & EVSE Adaptor Kit The DiLOG ALVA Pro Multifunction Tester & EVSE Adaptor Kit combines the accurate and trusted capabilities of the Dilog ALVA Pro Multifunction Installation Tester with the DiLOG DLEV1 EVSE Charge Point Adapter Kit for complete installation, EV charger testing and verification. Having been built to meet the latest industry standards, including full BS EN 61557 compliance, the ALVA Pro Multifunction Tester combines precision, reliability, and advanced automation, making it the ultimate solution for electrical professionals. DiLOG part number: ALVAMFTPROEV DiLOG ALVA Pro Multifunction Tester The DiLOG ALVA Pro Multifunction Tester is a high-performance MFT, expertly engineered for UK electricians performing work in accordance with BS 7671 and BS EN 61557. Whether carrying out initial verification, periodic inspections, or EVSE commissioning, the ALVA Pro delivers the precision, reliability, and diagnostic capability required for full 18th Edition compliance. Designed to streamline on-site workflows, the ALVA Pro combines speed, accuracy, and ease of use. It features advanced RCD testing, non-trip loop technology, intelligent circuit analysis, and automated EV charger validation. Its intuitive interface, vibrant full-colour TFT display, and built-in memory ensure a smooth user experience while maintaining professional-grade results. This displays includes interactive pass/fail indicators, and the tester supports a wide range of RCD types, including AC, A, B, B+, EV, and F. In order to enhance testing efficiency, the ALVA Pro includes Continuity and Earth Loop Auto Start with a secondary results display and intelligent 2/3-wire high-current loop detection, eliminating the need for manual test selection. It also introducse 15mA continuity testing, ideal for identifying issues in motor windings and inductive loads. For more in-depth safety assessment, the instrument features Zmax and Imax tracking, recording maximum Earth Loop Impedance and Perspective Short Circuit Current (PSC) values. Further customisation includes variable RCD test settings, 1A RCD testing, and 4mA continuity testing for enhanced diagnostic flexibility. DiLOG DLEV1 EVSE Charge Station Adaptor Kit The DiLOG EVSE Charge Station Adaptor Kit is a universal EV charger testing solution compatible with all multifunction installation testers, designed to simulate various Proximity Pilot (PP) and Control Pilot (CP) states for verifying the safety and functionality of wall-mounted or free-standing EV charge points. Supplied with both Type 1 and Type 2 connectors, it enables testing across virtually all EVSE systems on the market. The kit supports CP states A, B, C, and D, as well as CP error “E”, signal output, load connection, Protective Earth (PE) pre-tests, and PE error detection. It also features a standard 13A socket for MFT mains leads or inline load connection, along with 4mm input terminals for single- or three-phase setups. Offering broad compatibility and comprehensive testing capabilities, the DLEV1 adaptor is an ideal, cost-effective choice for professionals entering the EV installation and testing field. Key Features High contrast full-colour TFT display with interactive pass/fail indicators for intuitive operation Supports RCD types AC, A, B, B+, EV, and F for wide-ranging installation and EV charger testing Automated continuity and Earth Loop testing with secondary display for efficient result review Intelligent 2-/3-wire loop detection eliminates manual selection and streamlines testing Adjustable low-current RCD-LOC+ non-trip loop testing for safe, accurate Earth Loop measurements Advanced diagnostics including variable RDC settings, 1A RCD, and 4mA continuity testing EV auto test sequence combines loop, RDC-PD/MD, RCD, ramp, and voltage checks in one workflow DLEV1 adaptor enables comprehensive Mode 3 EV charge point testing Control Pilot and Protective Earth testing including CP error detection and PE pre-checks Six NiMH rechargeable batteries with built-in charging system for extended field use Internal memory stores up to 1,000 test results for improved traceability and data management