ASC SKD-6 Water Pump Automatic Pressure Switch Controller with Built-in Pressure Sensor Reviews

ASC SKD-6 Water Pump Automatic Pressure Switch Controller with Built-in Pressure Sensor Features and Benefits Starts and stops the pump automatically when the tap is open or closed. This means the pump does not need to be turned off manually. Maintains a constant pressure from the pump during operation resulting in a reliable water supply. Automatically stops the pump in the situation of no flow (due to inlet pump blockage) The controller eliminates pressure fluctuations at flows as low as 1L/min. Plug and play leads (IEC type) are installed on the controller so that a licensed electrician is not required to replace the controller.   Technical Specifications Bar: 10 Bar Brand: ASC Casing Material: Technopolymer Kilo Watts: 1.5 kW Port Size Inlet: 1" BSPM Inlet Port Size Outlet 1" BSPM outlet Product Type: Pump Controller Volts: 240 V Construction Characteristics Inlet: 1" BSP male Outlet:1" BSP male Built in non-return valve No flow/loss of prime protection Manual start switch (RESET) Voltage LED (GREEN power on light) Pump working LED (ORANGE pump on light) No flow LED (RED failure light) 1.5 metre lead and 3 pin Australian/New Zealand plug 0.6 metre pump power lead, plug and play Inbuilt 10 bar pressure gauge Technical Information IEC type Voltage: 220V (-6%) / 240V ( 6%) Maximum Current: 16(8) Amps Maximum kW: 1.5kW Frequency: 50Hz Ingress Protection: IP65 Maximum Water Temperature: 60 deg C Starting Pressure: 2.2 bar Recommended Minimum Pump Pressure Required: 3.0 bar Maximum Working Pressure: 10 bar Minimum Flow: 1.0 l/m