Veto Pro Pac VPP-TECH-PAC-BLACK Tech Pac Blackout Backpack Reviews

The Tech Pac Black is a blacked-out back pack based on our Tech Pac but with front and back removable tool and meter pocket panels which are also exchangeable.  You can also purchase a Laptop Panel that can turn the bag into a tool bag/laptop bag, and the Laptop Panel can go in the front or the back. Includes Front Tool Panel and Back Tool & Meter Panel, Laptop Panel Sold Separately. Specifications Height (H): 19.5in (49.5cm) Width (W): 13in (33cm) Depth (D): 10in (25cm) Handle Height (HH): 22in (56cm) Weight (empty): 12.25lbs (5.5kg) Internal Volume: 1550in3 (25L) Max Payload: 50lbs (23kg) Capacity Vertical Tool Pockets: 46 interior and exterior tool pockets of various sizes Upper Pockets (Front Side) Designed For Extra Tool Capacity 8in Electrical Tape Strap 2 Storage Bays- 4 Storage Platforms Manifold Gauge and Hose Storage Pocket D-Rings: 4 large and 5 small Outside Mounted Stainless Steel Tape Clip Holder Build Load Tested: Pulled To Destruction At 830 Pounds (Handle failed); Hook failed at 200 Pounds Weatherproof Base: 3mm Injection Molded Polypropylene Weatherproof Body Fabric: 950 and 1250 PVC Impregnated Denier Nylon All Blacked-Out Polyester Body Fabric and Construction - Gray Pockets For Better Visibility Quick Release Metal Hasp: Allows Easy Access to Rear Storage Bay Internally Stored Aluminum Hook to Hang Bag Over-Molded Ergonomic Grip Padded EVA Thermoformed, Ergonomic Back Padding Metal Shoulder Strap Sliding Buckles D-Rings: Powder Coated Steel Rivets: Marine Grade Rivets Stitching: Industrial Strength Double Nylon Stitching Features Includes Front Tool Panel and Back Tool and Meter Panel, Laptop Panel Sold Separately Metal YKK Locking Zippers Magnetic Screw Catcher Warranty: 5 Years (see Veto warranty terms and conditions) Keep the Zippers Clean and Lubricated Over time, dirt and grit will clog the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant. Protect the Zippers From Sharp Objects and/or Excessive Heat Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils. Don’t Overstuff the Bag Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!