Well built and comes with a variety of different sized outlet fitting. Liked being able to divert intake downwards so ensuring no vortex will be created. Great range of output speeds so easy to balance with tank input.

Sold by Complete Aquatics
The information on this page is based solely on product reviews written by customers of Complete Aquatics via Trustpilot.
Here’s what people highlighted
Quality
Value for money
Product details
Brand: Jecod
Jecod Sine DCP-6500 DC Pump and Controller The Jecod DCP DC Return Pumps are high performance return pumps with controller which operates professionally and reliably. The simple speed control and operation of the Jecod DCP is reinforced by innovative electrics that provide around 65% energy savings. Now with Sine Wave technology meaningh ultra quiet operation. With a 10 speed controller and a slightly increased head pressure performance compared to previous models, the DCP pumps delivers an ultra-quiet performance and can be used in marine and saltwater environments. Courtesy of its ability to electronically detect error conditions, the device communicates visual warnings and utilises an automatic power off protection, to prevent damage to the motor if the rotor becomes blocked. The feed mode disables the pump for a total of 10 minutes The Jecod DCP pumps contain no copper elements and is reinforced with a resistant ceramic shaft to provide long life and corrosion resistance. The new DCP pumps are supported by their Sine Wave technology and their new enclosed impellor design resulting in a super quiet operation. At a Glance: Maximum flow rate of up to 6,500 litres/hour - adjustable from 1,200 – 6,500 litres per hour Max Head Height 4.5m Max Watts 48 Inlet/Outlet 25/32 or 40mm Improved head pressure performance over the DCT models Improved enclosed impeller design for a quieter operation High performance motor with innovative electronics resulting in power savings up to 65% Sin Wave technology resulting in ultra-quiet New digital controller with speed control settings 30%- 100%, 1% increments IC electronic detection for automatic power off protection upon no water Can be used in Marine and Freshwater applications Long operation life is achieved by the use of wear resistant ceramic shaft Soft start operation - pump gradually builds up to set flow rate Feed mode disables pump for 10 minutes 10 Speed settings - 30% - 100% with 1% steps power consumption indication and settings are retained if the power is lost Internal and External use Dimensions: L196 x W104 x H163 55w
All reviews
Quality: 5
Value for money: 5
Cracking Pump for the money. Cheap to run and can shift loads of water for the wattage it's running. Good choice of fittings, catering for both fixed solvent weld or push fit hose. Will run outside of the pond as a dry pump and stays cool even when running flat out. Full control of pump speed setting achieved via a push button controller unit which displays the wattage and percentage the pump is running at.
Quality: 5
Value for money: 5
