Mortar Mix Reviews

Mortar Mix 20kg in plastic bags is a quick, easy to use sand and cement mortar suitable for a wide range of applications. Applications Brick laying Block paving Pointing Rendering & patching Slab fixing General repairs Features Grey colour when dry Just add water Interior and exterior use Conforms to BS EN 998-2 Class M 2.5 Benefits Complements all colours of brick Quick and easy to use One product for all applications Quality assured Preparation Ensure any loose material is removed prior to application of the mortar. When repairing pointing joints the depth of the joint should be twice the width. To help prevent the mixed mortar drying out too quickly, dampen bricks, blocks and bases before proceeding. Brush any loose debris from the surface of the area prior to use. Mixing instructions 1. Empty the product onto a clean, flat surface. 2. Create a pile of mortar with a hollow in the top. 3. Add small amounts of clean water into the hollow ensuring that it does not run down the edges. 4. Shovel or trowel the contents in the water. When all the waterdisappears create another hollow and repeat. 5. Continue to add more water until the consistency required is achieved (approximately 3 litres per 25kg bag). Avoid adding too much water as this will weaken the mortar mix and affect the strength and setting time. On completion, cover newly laid masonry with plastic sheet or hessian to protect from weather hazards until fully set. Recommended application temperature is 5° to 25°C. Yield 20kg bag covers: Brick laying (standard bricks) = 25 Render (10mm depth) = 1.25m² Block laying (10mm joint) = 20 Pointing (10mm joint) = 125 Paving slab fixing (25mm depth) =0.6m²