Bradite Fastrac Rust Converter Reviews

Quick Links - Click To Jump To Section:     Features & Benefits Application Features & Benefits High performance single pack water based rust converter Intended for the treatment and passivation of surface rust on all hand or mechanically prepared rusty ferrous surfaces Especially suited for objects which may be difficult to sand blast such as; fences, iron railings, guttering and outdoor fixtures Suitable for use on wire brushed or mechanically abraded surfaces which are free from heavy rust scale, grease and dirt White colour turns black on contact with rust Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems Application Application and use should always conform to the codes of practice described in BS 6150 and BS 5493 Stir thoroughly before use Applicable by brush, roller, conventional air spray or airless spray. Brush application is strongly recommended and is the preferred application method for best performance: Brush and Roller - Supplied ready for use. Thin with 0 - 5% water if required Conventional Air Spraying - Thin with 10 - 20% water as required, tip size - 2.0mm, tip pressure 60psi(0.4MPa) approximately Airless Spraying - Thin with 0 - 15% water as required, tip size - 18 thou (0.46mm) approximately, tip pressure- 2100 psi (15MPa) approximately Apply 1 full coat @ 30 microns/WFT or 20 microns/DFT 20 m2/L/coat theoretical coverage rate Clean all equipment immediately after use with water for best results