Custom Filled Aerosols Reviews

2K High-density 2-pack acrylic paint for solid colour finishes in gloss (90%), satin (40-60%) and matt (30%) finishes. Ideal for use on properly prepped metal substrates in a range of environments. Compliant with EU VOC regulations at <420g/L. Durable, high-build coverage with excellent film thickness (50–60 microns) and efficient drying times. Guaranteed shelf life of 36 months in unopened containers. Cellulose One-pack aerosol spray paint in gloss (90%), satin (40-60%) and matt (30%) finishes. For a wide range of surfaces in industrial, commercial, and touch-up applications. Fast-drying formula – tack-free in 10–25 minutes, full cure in 24 hours. Easy spray application with adjustable nozzle control; 2–3 coats recommended. Flash point 22–30°C; suitable for low heat drying environments. 12-month shelf life in cool, dry storage conditions. Direct-to-Metal (DTM) Etch Primer, Primer, and Colour all in one! Quick-drying zinc phosphate paint formulated for direct application to blast-cleaned steel and most metals including steel, galvanised steel, aluminium, zinc and non-ferrous metal. Choose from satin (40-60%), matt (30%) and semi-gloss (85%). For including structural steel, panels, and general fabrication. Anti-corrosive protection, surface-dry in just 20–40 minutes. Excellent adhesion using a single coat – no primer needed. Flash point range 22–32°C; VOC content approx. 507 g/L complies with safety transport standards (UN1263, Class 3). 12-month shelf life when stored correctly. Ultimate Super High Build Primer Aerosol High-build aerosol primer/filler for efficient spot repairs. Provides excellent coverage and easy-to-sand finish. Suitable for use under solvent and waterborne basecoats. Compatible with etch or plastic primers where needed. Fast drying: dust free in 5 minutes, through cured in 10 minutes, fully dry in 24 hours. Available in 400ml aerosols in black, white, or grey matt 30% finish. For professional use only – not suitable for DIY. Do not overload product onto panels – this causes lack of adhesion. Etch Primer Aerosol 1K air-dry etch primer for galvanised steel, steel, and aluminium. Ideal for small spot repairs – not recommended for large jobs. Overcoatable within 30 minutes with HB primer or other compatible primers, without sanding. 30% matt finish. Fast-drying formula minimises downtime. 12-month shelf life when stored correctly in a cool, dry place. Do not leave bare metal exposed longer than 5 minutes before applying. Do not overload product onto panels – overapplication reduces adhesion. Do not spray on open flames or ignition sources. Ultimate 2K HS Clearcoat Aerosol Ready for use high solids express clearcoat designed for easy application and excellent vertical holdup. Provides a deep gloss finish when cured; available in 90% gloss, 40% satin, and 20% matt. Ideal for SMART and spot repairs – no hardener required. Apply 2 coats from 15–20cm distance; flash-off time of 10 minutes between coats. Fully cured within 24 hours at 20°C; low heat or infrared may be used to speed drying. Supplied in 400ml aerosol cans; colourless finish with a flash point of 22–30°C. VOC content approx. 51.2% (663 g/L); compliant with safety transport standards (UN1950, Class 2.1). 12-month shelf life when stored in a cool, dry place in unopened containers. Ultimate High Adhesion Promoter Aerosol Clear, ready to use high adhesion primer, ideal for plastics, glass and various metals. Works well on chrome, nickel, tinplate, zamak, aluminium and alloys. 12-month shelf life when stored in a cool, dry place in unopened containers. Apply 2 coats from 15–20cm distance; flash-off time of 10 minutes between coats. For professional use only.