Juno Bikril Matt Masonry Finish Tintable Reviews

Bikril Matt Exterior Emulsion Bikril Matt is a water-based acryl-vinyl emulsion designed for façade protection and decoration. It offers long-term durability for both exterior and interior surfaces. Delivering a tough, flexible coating, it resists cracking, flaking and peeling even in highly changeable weather. With high opacity, excellent coverage and breathable properties, it ensures reliable and consistent results in demanding conditions. Key Performance Benefits Excellent adhesion and smooth matt finish Alkali and UV resistant with anti-carbonation protection Highly washable and resistant to pollutants and dirt Fire Retardant on non-combustible substrates: Certified B-s1, d0 according to EN 13501-1:2007+A1:2009 CE marked and compliant with EN 1504-2:2004 for concrete protection Low VOC content: Maximum 30 g/l Certification for adhesion, anti-carbonation, permeability Recommended Applications Suitable for a wide range of substrates, Bikril Matt is ideal for: Exterior masonry including concrete, roughcast, pebbledash, and sand-faced or rustic brick Interior areas requiring a durable, fire-retardant coating This product may also be used on previously painted surfaces in good condition, provided the surface is clean and free of gloss or defects. Preparation and Compatibility Ensure surfaces are clean, dry, and structurally sound. For new substrates, allow curing for at least 28 days. Remove any efflorescence, oils, and loose particles. Sand polished or glossy surfaces lightly to improve adhesion. For porous or powdery substrates, use a suitable primer: Primerlite for general surface consolidation Hidrocril for interior applications Application Conditions Stir thoroughly before use. Apply by brush, roller or spray in ambient temperatures between 5ºC and 35ºC. Do not apply on hot substrates or in high humidity (above 80%). Avoid painting in windy conditions or with the risk of rain, as water contamination before full drying may cause surface blemishes ("snail track" blistering). Ensure surface temperature is at least 3ºC above the dew point. Allow a minimum of 6 hours between coats; no maximum interval is required. Two coats are recommended for best results. Restrictions and Limitations Do not apply to surfaces below 5ºC or with imminent risk of rain or strong wind Not suitable for surfaces prone to persistent moisture or rising damp Do not apply over unstable or glossy surfaces without suitable preparation Do not discharge waste into drains or the environment Always refer to the downloadable technical data sheet for complete information and application guidance.