Kolorbond Aquatek Reviews

Kolorbond Aquatek Kolorbond Aquatek is a water-based, single-pack coating that offers a durable solution for both interior and exterior applications. Its formulation is based on high-performance polyurethane/acrylic resins, providing long-lasting protection and a professional satin finish. Available in 4,900+ colours, Aquatek is perfect for refurbishing or coating a variety of surfaces, including PVCu, polyester powder coatings, GRP, and primed wood. Surface Preparation and Application For optimal results, surfaces must be clean, dry, and free from contaminants. For new PVCu, thorough cleaning with Windowprep and light abrasion is recommended, while refurbishment projects should include additional cleaning with Vinylkleen. Application is straightforward with spray guns, but the product also allows effective brush application. Always ensure adequate drying between coats for a smooth, professional finish. Performance and Durability Tested to BS EN ISO4892-3: 2006, this product has passed accelerated weathering tests, proving its resistance to harsh exterior conditions. It remains flexible, preventing cracking even when applied to substrates that may bend. The coating offers exceptional scratch resistance, making it ideal for high-traffic areas and extended use. However, avoid using this product in conditions of low temperature or high humidity, as it can negatively affect adhesion and finish quality. Dust dry in 15-20 minutes. Hard dry after 24 hours. Full adhesion and hardness achieved in 7 days. Application Recommendations This product is compatible with Technispray/Kolorbond products. Always avoid over-brushing and thinning with more than 5% water. For industrial use, force drying at 50°C can be employed to speed up the curing process. Refer to the downloadable data sheet for further details and recommendations. Restrictions and Limitations It is essential to avoid applying the coating in temperatures below 10°C or in high-humidity environments, as these conditions will impair drying and adhesion. The product should not be used on surfaces that are contaminated with grease, dirt, or other residues without proper cleaning. Additionally, do not apply in conditions where the temperature could drop, as this may impact the performance of the coating. Health and Safety The product is classified as a low-hazard material but may cause skin or eye irritation. Avoid prolonged exposure and use personal protective equipment where required. Care should be taken to avoid inhaling fumes during application. For transport, it is not classified as hazardous. Always refer to the MSDS for detailed safety information.