Bodor Laser Reviews 1,253

We are satisfied with the service you provided us during the servicing of the machine. An engineer from your company named Lee did a very good job.

We were lucky to have Dipesh Maharjan help us with laser install and training, he is very knowledgeable and professional, we are very happy that he was selected to help us and hope to work with Bodor laser more in future.

Good rating
Thanks to Bodor's engineer Liao, who changed the lens for our machine, adjusted the parameters of cutting pipes and plates, solved our problem, and now the machine can work normally.

Hello we bought K type bodor tube cutting machine .After installation,we did not set air cutting parameter because we did not have air system.After ready system;Mr Taha came to our factory and set air cutting parameter.Also he solved auto load problem.Thanks to Mr Taha nd Bodor company

The technology is at a very high level, which speeds up production a lot. The Chinese repairmen and operators are really professional and fast in their work. All the best.

We were very satisfied with the machine and technitian, also support for it was great. For all the questions that we have we get fast responses and also technical guy had knowledge for instaling and to show us how to work with the machine.

Thanks to bodor's engineer liao, who adjusted the parameters we need for our k1 machine, we are very satisfied with the cutting effect, bodor's machine works very well.

The engineer Liu that attended site was fantastic and very helpful. Fixed any issue we had. Very professional.

We have been using our combined pipe and sheet metal machine for 2 years. We called the service to move the machine. The machine has been moved and is now running without a problem. In addition, Bodor service set air parameters and gave training where we had questions. We thank Batuhan and Taha for their support. Greetings to the Bodor family.

We purchased one bodor laser machine F3T6 with 1500W laser source,it worked for more than 3 years,it reaches our expectations.we impove the power of laser source this time with 3000w.Michael came and change all the parts and make it works properly.We are happy with cooperation between bodor company,and thanks for Michael Yang,installation and training.

We are pleased and thankfull you finnished so fast, and beign kind and polite

Bodor c3 6kw machine with scanning is installed and working well. Dipesh (tech) was very helpful on machine install and training. Machine cuts great and is easy to use. Would buy again.

Equipment quality is good and installing was profesional.

The machine had a chiller flow problem. We called service. The chiller was dirty. They cleaned the chiller and fixed the problem. Thank you Bodora and Batuhana for their service. Our machine is working well. We are very satisfied with our tube machine

The kasun company with the F1530T is very satisfied with BoDor's service and the service team's care during the past time. Helped us with the fastest troubleshooting.

Absolutely Fantastic service from our installer, Wu Jikuo. The guy was very open to all questions I asked, and was willing to accommodate me in the ins and outs of the new laser table our company now runs. I would recommend him, and Bodor happily.

Hello, we bought a 22kw laser machine from Bodor. It has been installed. We have been using our machine actively for 1 week. Andy Batuhan and Taha set parameters, training and installing processes . We were satisfied with the friends at the Bodor service. There is no problem with our machine for now. We will start cutting with air. Many thanks to Bodor and them service team.

Hello, we have Bodor K type Bodor laser cutting .Our personal changed and we needs training for machine usage also NPI type profile cutting.Mr Taha gave training and set NPI parameter .Also he checked machine general condition.Thanks to Mr Taha and Bodor company