Push Down Bath Filler with Overflow, Temperature and Flow Control Reviews

Push Down Bath Filler with Overflow, Temperature and Flow Control Simply connect your hot and cold feed into the filler and that's it. The filler is temperature and flow controlled, it acts as an overflow, a filler, a hot, a cold, a filler and a waste wtih trap included. All in One. Done. A really good bit of kit that will definitely work well with your Omnitub. This saves you having to use any additional hardware to control the temperatue mixing and flow control to fill your Omnitub. A very popular choice since bringing it back to our offering. It's better than ever. Important Notice This piece has a depth of 74mm. It will be perfectly OK to use on the 100mm side of the non seated tubs without protruding the tub dimensions. If this is used on a seated or a side of a non seated tub which is not the 100mm side then it will protrude the external dimensions of the tub which will mean that a panel will not fit flush with the tub and will need a slight lip over the external dimension of the tub. This is generally OK however if it is not due to your dimensions being extremely final then do not use this piece. The Bath Filler With Overflow (without flow and temperature control) can be used on any sides of the non seated tubs but will also protrude the external dimensions of a seated tub due to the sides only being 25mm. Important Notice