Brother Reviews 

My printer was still within warranty therefore there was no problem for Brother to arrange for it to be collected to be tested by an engineer and returned to me. The reason I returned my HL-1210W is because it leaves tramlines on the paper. The engineer tested it on their extremely high quality paper and returned the machine to me stating it was the quality of my paper that caused the tramlines. So, I reversed the paper and tested it on their posh paper - and hey ho, the tramlines are still there. Did they photocopy their results, use the copies and pass them off that there is nothing wrong with the printer I bought from them? I don't know, but somewhere along the line, there is a genuine problem, the printer is not fit for purpose, and it's not to do with the paper I use, which is Navigator 80 gsm, it is to do with the printer. I don't have to put up with this nonsense. A printer should be fit for service from the getgo, not have a problem which they happily turn a blind eye to. This problem must be resolved asap because I cannot send out presentation work printed from a rubbish printer that does not do what it's meant to. If I wanted below par presentation work, I would have gone to Currys and bought one of theirs for £40 not spend £149.99

Horrible cashback experience. I thought the printer prices were fine, and with cashback it would be a good deal for both printers. However, the web form is broken. When you email them, the message is not properly passed to the correct department. I then had to call and send additional emails just to confirm the status of my cashback.

My suggestion: skip the generic help address and email Michela.Roylance@
directly with all the required information from the form — only then will they process the cashback.

If this is how their support works for printers as well, I’ll go with HP next time for sure.

Bought a Brother printer; hardware OK but the EcoPrint subscription option that they try to force you to accept is appalling.

They (incorrectly and without warning) removed money from my account and have (as other reviewers have stated) now "bricked" my printer. So I have an expensive, ugly and environmentally disastrous piece of useless plastic sitting in my study.

They won't help you and will obstruct any attempt to contact an individual. Attempts to contact "support" resulted in them yelling at me and slamming the phone down after I asked for the name of the person that I am speaking to. I have attempted to contact their legal department but they haven't even afforded me the courtesy of an acknowledgement. I am left with little option but to commence a claim in the County Court.

EcoPrint is a legalised protection racket. If you cancel your EcoPrint subscription (not easy to do, hidden in the depths of their website) Brother immediately remotely disable your printer. It will remain unusable until you purchase and install new non-EcoPrint cartridges, even though your current (EcoPrint) cartridges may be full and have many pages of printing left in them. It is a wicked, deceitful, and immoral practice by a wicked, deceitful, and immoral company. Awarded an undeserved one-star rating, the lowest allowed; in truth they deserve prosecution for unfair trading. Avoid them at all cost.

This comment is regarding printer toner which should have been delivered from Brother, by DPD today.

I'm at my French house at the moment so I cannot put my finger on my usual phone or laptop, and thus have no details at hand regarding the order made last week.

DPD, the company which should have delivered the toner this afternoon, just tootled off back from whence they came, saying (through the app) that they couldn't find the address, after they had first notified me through the app that "they were on their way and my address was next".

Someone was in the house waiting for DPD so I am firstly very unhappy with DPD, and secondly, I am very unhappy with Brother, and in particular, an employee named Alex who I have just spoken to in their Customer Service, who put down the phone on me as I did not have the original order number.

As I told him, I am in my French house and have no details at hand. He said that he was not "prepared to deal with me unless I had an order number".

I'm really fed up with this afternoon's dealings with both DPD and Brother's customer service, that I am now just going to send back the order to John Lewis, the company from where I ordered the printer.

For the last 10 years, I have relied on Canon and HP printers without any issues but this time I chose the Brother DCP-T426W and unfortunately, I regret my decision.

The printer does not support AirPrint. Although it is Wi-Fi enabled, it requires the iPrint&Scan app which only supports printing PDFs or images. This is highly restrictive, as most users also need to print documents in formats such as DOC, PPTX, PPT, workflow charts, and others.

The printer stopped functioning after just 18 days of use showing a Scan AF Error.

Machine Serial Number: E82258M3H958504

To add to the concern, even support engineers acknowledged that these printers rely on outdated buffering technology which has been obsolete for nearly a decade.

This experience has been extremely disappointing, and I feel that Brother printers are neither reliable nor efficient compared to competitors. I sincerely regret purchasing this printer and expect a resolution or replacement at the earliest.

If I could give 0 stars I would
App connect rubbish
Customer service shocking
Do not sign up for ecoprint they will brick your printer and render it useless when u eventually find after circle back and circle back with the brother connected app how to cancel what a waste of time decent hardware but software and values behind the scenes omg

I don't mind the idea of subscribing to toner, I don't love it either, but - whatever. The main thing is, it has to work, and it just doesn't. This is not really the fault of the idea, but Brother's implementation. Their website and app is confusing to use - you should just be able to check your subscriptions for devices, its all pretty simple really, but they make it a total unintuiative pain. They clearly got inexperienced or cheap people to make their website. Secondly, which compounds this issue and makes it much worse, is their website doesn't work very well, it's slow and right now, it can't even load the page I want for the last two days. So, no matter how good their printers are, no matter how good any aspect of them is - its all ruined by something as simple as their website user interface and performance, something that even I could go to their company and fix within a week. Pathetic is an understatement. My advice - don't give this company your money, it doesn't deserve it.

One of the worst company’s I have dealt with.
I phoned their helpline yesterday.
I cannot access my account.
The operative was helpful until he asked me to screenshot the whirring circle you get on a computer when nothing is happening.
I said I cannot access my computer.
He said the problem is he couldn’t escalate tge issue without a screenshot as IT would only de escalate it.
I could not quite believe it.

EcoPro is a scam. DO NOT SUBSCRIBE TO IT! Ive been paying for my subscription for well over a year. Im not a heavy printer, some months its light, and other months it can be a lot more. This month it stopped printing even tho there was toner in the cartridge, Brother said i ran out of toner, this wasn't helpful because i needed to print documents that HAD to be court the next day. So i had to go out and buy another printer, just a black and white brother laser printer, but because new printers dont come with a full toner, that one ran out of toner as well. Leaving me having to pay the courts to print our documents.

As it happens i have another brother printer that was given to me by my dad that he bought the same month i bought mine based on my recommendation but got rid of it after just 5 months. My dad was being charged while in a trial period so cancelled it and his toner wouldn't work cos he cancelled his sub, so Brother shipped him more toner, he resubscribed, still got charged and the toner still wouldn't work, he cancelled his sub permanently and, yup, he couldn't use his printer either unless he bought new toner, despite paying 5 months for EcoPro, so he dumped the printer on me. I thought id persevere a bit with mine to see how i get on and its been ok at best, but now have cancelled my EcoPro subscription,

Ive now received my brand new toners but i cannot use them because i cancelled the sub, so now i have 2 full sets of new toner from my dads printer that cant be used due to them being subscription toner, and i have around 1 x full set and 2 full ish sets for my printer that i cannot use and after paying all that money for over a year and now i have to go out and buy a full set of toner. Im not sure where the Eco is? Its not been economic on my pocket, and its not very Economic on the environment they dont offer a easy route to send dead toner back.

Support are terrible, the app is terrible, and the website is terrible, which sends you in different places to manage your EcoPro subscription leaving you confused!

My advise is to stay clear of Brother, we have 3 laser printers that we have paid for the toner, but have no toner. If you need to buy more non sub toner to have just in case you run out, you may as well just do that and not use EcoPro, toner doesnt go out of date!

Lazy and uncaring customer service and I don’t like the printer very much either.

The Amazon Business Page had the wrong printer ink to printer compatibility.

I phoned and emailed about this, Brother put all the blame on Amazon (I’m pretty sure Amazon don’t write the information lol)
They also said I need to go back to the seller on Amazon. But it was sold by the Brother Store on Amazon?
Just so felt lazy and uncaring and fobbed off.

Terrible company and terrible ethics, I cancelled my ecopro subscription as it is a rip off, over twice what it costs to buy the cartridges and now I have 4 cartridges that have been disabled by brother. What kind of a company does that what a waste!!!

Before you buy any printer - think exactly what you are going to be using it for and how often you will use it. And it's worth looking at the price of replacement ink - and make sure you can understand what is being sold to you in the advertising.
I chose the Brother HL-1112 because I'm beginning to think that Brother are the only printer manufacturers who understand what many users are after in a world where electronic non printed mail is king because they provide a simple, straightforward, easy set-up, easy use compact little device that does not constantly demand new difficult-to-fit expensive cartridges. I also get puzzled by the intrigue of it all when you look on-line or go into a store to find that some deals offer you things like '3 years of free ink'. How does that all work? I am a light user just after a printer that will do a few letters and lists and the odd graphic now and again, so I get the impression I would be paying for something I would never make use of. But enough of the rest - let's talk about the Brother printer itself.
Size wise it fits neatly on a shelf (roughly 39cm across, 25cm bottom to top and 29cm back to front) and as the paper feed and out tray are both at the front so there is no wasted space. Unboxing is fairly easy. You get the instruction booklet and all the usual paperwork, a CD with the setup software, the toner cartridge and the machine itself which comes pre-plugged. The only down side is you need to find your own print cable - USB Printer Cable 2.0 Leads A Plug to B - but they are cheap enough and if you are replacing your old printer you'll find that the cable that worked on your old one probably works on this. Although you are provided with a CD to install the driver software on your laptop / desktop, you can actually go to the Brother website and download what you need from there. (Downloads | HL-1112 | United Kingdom | Brother). I suggest you do this before you start setting up the actual device. The setup instruction leaflet is basic but easy to understand. Lift the white coloured printer top up to snap the toner cartridge (Which is much bigger than a standard print cartridge) into position. Instructions are shown inside of the printer which then have to be pulled out and discarded. I'm a bit of a klutz when it comes to fitting things together but I was able to manage this inside a couple of minutes. Close the top then pull out the drawer at the front and load the paper. Plug it in and turn it on. Attach the cable to the back and the USB end to your laptop / desktop. (If you are buying a new cable you can buy them in 2, 3 and 5 metre lengths.) Select what you want to print and watch it do its stuff. Printing is quick and quiet and quality is good.
To summarise
+ Easy to set up
+ Compact
+ Good quality print
+ Quiet
+ Replacement Toner Cartridge is much cheaper than standard printer cartridges - and you only need one.
+ Reliable - based on the fact my last Brother printer lasted for about six years
- No cable supplied
- Mono only so no colour printing - but I see that also as a plus as it simplifies reordering toner
- No Wi Fi although I read somewhere that you can make it a Wi-Fi printer with a Raspberry Pi zero - but I am not sure I even know what that means

An absolutely terrible company to deal with. I have a product to return.They have made it impossible to do. Nobody contacts you with a return label. You chase and chase and get told to await an email. There is no human contact. Just been told that the hold up is due to holidays. You took my money pretty quick - no holiday there.

Brother designs self destruction in their printers if you use a third party toner supplier, its all over the internet and idiot me didn't check that. Now I have the problem that seems so common "Open the cover and install toner cartridge". Doesn't say which one - that's deliberate, but why? I used third party toners because Brother toners are more than half the cost of a new printer.

So this printer is going to the tip and I will NEVER EVER waste another penny on anything from this trashy company.

Its not even like their software is any good, that will annoy you just as much as the ridiculously expensive toner refills you are now forced to buy.

There should be a law against sh!t companies disabling products this way.

Printer is necessarily over complicated, requires constant attention, customer service have bad attitude and the ink is a total rip off.

World give this 0 stars if I could. Just paid for new ink cartridge and money was taken out my account no goods received. No help from customer services

We made the mistake of purchasing a Brother printer with an Ecopro ink subscription bundled into the purchase price. The printer is great, but the ink supply company have had difficulty activating the subscription. No fault our end as has been verified by our bank who confirm that Ecopro has never submitted an invoice to our account. They have been repeatedly blaming us for failures on our credit card which never took place. Brother have acknowledged this in support emails, but failed to intervene and the ink supply company has now used the internet connectivity to cut off the usability of our printer. So despite having Brother on our side, and a ticket number for customer support, and a support officer who seems to be kindly, courteous, concerned and competent, we are now without a printer we can use. The printer is good as new and we have plenty of ink, but we are being forced to buy another printer from a different supplier just to get out of the clutches of Ecopro. We love our Brother printer, but would advise anyone NOT to purchase from Brother if it means entering into any kind of subscription arrangement with this terrible associated company.

The hardware (MFC-L2860DWE) looks OK and I installed the app and drivers without any problems. (I hardwired the printer to the modem and followed simple steps on Brother's website.)

The one minor ergonomic design flaw in the printer, is where the lid to the scanner bed is located (directly above and in the same side of the printer), in relation to a lid to open the printer to get inside. I am still new to this printer, but when trying to open the scanner, I every time open the printer instead. The scanner lid is recessed compared to the protruding ‘handle’ for opening the printer, when you reach, you get it.

My main issue with this printer/scanner (the reason for this 1 star review), is the (in my opinion a fixable bug) in the Brother iPrintScan app. It is cutting 3 to 4 mm off the edges when scanning or printing an A4 page. Brother does not make this known "feature" clear in their advertising. (We have a very old lazer printer/scanner by a different brand, it does scan and print right up to the edge of an A4 page.)

I have just been told by Brother's technical support after many times having to contact them to try to get this problem sorted, first that it is a known fault with Windows causing it, then that it is a known and documented feature according to "accepted design specifications", that the printer CAN NOT scan (or print) up to the edge of an A4 page. The hardware according to Brother, cannot see/print between around 3 to 4 mm of the edge of an A4 page.

I told the guy I spoke to that what he was saying and Brother’s documentation, is 100% factually wrong and I explained why. He was not interested.

When I use Brother’s iPrintScan app on Windows 10, roughly 3 mm is CHOPPED OFF EACH SIDE of an A4 page. When I use the Paint app on the same computer, MORE THAN the whole page is scanned in, apart from 3 mm off the top of the page. However, the page size is set to legal in the Paint app and I am not able to change it to A4. When I use the 'Document Scanner' app on a Linux computer, 100% of the A4 page is scanned in, spot on !!!

Based on my own tests, there is an error in the CALIBRATION SETTINGS of Brother’s iPrintScan app, it is not a Windows fault or “accepted hardware specification”. I have proven beyond doubt that the printer/scanner hardware, does see the whole A4 page.

Brother should thank me for pointing out to them where their bug is, not fob it off by reading from a script (go in a loop) when speaking to customers. This is a fixable bug !

Case number: 7002134881.

I have a perfectly good basic laser printer for b/w printing - a Brother DCP-L2500D, a workhorse. We print very little so the printer has only used one cartridge since we purchased it. Anyway, it does what it says on the tin.
Or it does until Brother fails to provide a driver for Chromebook. And unfortunately their own Customer Service Agents don't appear to know.
When I contacted them, I was advised that there was a problem with my brand new generic cartridge priced €65.00 (only bought as nobody in our area stocked Brother cartridges). So as the printer had worked perfectly on its first original cartridge, off we went to the find a Brother cartridge - cost €80.00 - at our nearest stockist 30 kms away.
Only after it was unpacked and installed and the second Customer Service agent could not explain why the printer, AGAIN, could be seen by the computer but could not be reached for printing, was the technical team brought in.
The problem is simple, no driver for Chromebook for the Brother DCP-L2500D! Thank you and goodbye.
So I'm now in possession of two brand new cartridges, one generic, one branded, a printer in perfect condition but unusable with my laptop, and all of no use to me. AND I'm out of pocket by €145.00!
Built in obsolescence if ever I saw it. I am absolutely disgusted at the waste of money, time and patience for the sake of a printer driver.